Resintex

For more information or to purchase sample rolls online, please visit www.fibreglassmesh.co.uk

Resin Tex
Kingston Mills
Manchester Road
Cheshire
SK14 2BZ
United Kingdom

Phone: +44 (0)161 367 1373
Fax: +44 (0)161 367 1371
Email: sales@resintex.co.uk

Chopped Strand Mat

E-GLASS CHOPPED STRANDS BOUND BY POLYESTER BINDER FOR HAND LAY PROCESSES AND REINFORCEMENTS
NO FUZZ, DIRT OR IMPURITIES
FAST WET-OUT
EVEN THICKNESS
GOOD COVERING AND DEGASSING PROPERTIES
HIGH MECHANICAL STRENGTH AND HIGH WET STRENGTH RETENTION

Description

Chopped strand mat is made from E-glass fibre strands chopped to different lengths and bonded in one of two ways - either powder or emulsion. It is the most common form of reinforcement.

Chopped strand mat is used primarily for hand lay-up processes, filament winding and press moulding of FRP products including bathroom accessories, pipes, automobiles and other building applications.

Description	E glass chopped stand mat
Weight - g/m	225,300,450,600,800,900
Standard Roll Width	1000m +
Filament Diameter	Micron12
Binder Type	Powder or Emulsion Bonded
Tex	25g/kn
Coupling Agent	Silane
Moisture Content	</= 0.20
Loss of Ignition	2.0-8.0%
Resin	UP

Storage

The best conditions are temperatures between 15 and 35 degrees C and at a relative humidity between 50 and 75%, If the product is transported or stored at low tempera-tures (below 18 degrees C) or high temperatures (above 35 degrees C), it is advisable to condition it in the workshop at 20-25 degrees C for at least 72 hours before use to prevent condensation.

If these conditions are respected, glass fibre products should not undergo significant changes when stored for extended periods of time.

Products & Services

	Woven Glass		Woven Basalt
	Woven Aramid (Kevlar®)		Woven Carbon
	Woven Hybrids		Chopped Strand Mat
	Surface Tissue		Fibreglass Mesh
	Fibreglass Scrim (Repair Tape)		Fibre Comparison
	Weave Comparison		Commission Weaving

Information contained in this publication is for illustrative purposes only and is not intended to create any contractual obligation. Resin Tex reserves the right to change product specifications at any moment without prior notice. Please note that information given is in good faith and should be considered as a guide only. Suitability of the product for all applications is at the discretion of the user.

Cheshire Ribbon manufacture and distribute E glass, Basalt, Silica and Ceramic Fibre Textiles.

Member of the Greater Manchester Chamber of Commerce

You must have Adobe Reader installed to view the Datasheets.